Operable Walls - Series 100
Construction & Operation
15mm MDF on steel framework. Internal cavity filled with sound deadening materials depending on sound reduction level specified. Full length SAA interlocking vertical panel edge profiles incorporating a full length magnetic extrusion. Each panel incorporates spring loaded top and bottom seals, which are polyester powder-coated black with acoustic in-fill as necessary. Top hung requiring no floor tracks, forming a flush, flat wall when closed.
For CAD details and technical specifications, please go to the Downloads page.
Acoustic Performance: Rw 35dB - Rw 56dB.*
*Predicted sound insulation values calculated using Marshal Day 'INSUL' computer model.
Panel Weight: 38 Kgs to 72 Kgs per square metre. (dependant upon acoustic rating)
Maximum Opening Width: Unlimited
Maximum Panel Height: Up to 6m (Single Point Suspension); up to 5m (Two Point Suspension). Alternative Two Point Suspension systems can be tailor-made to suit specific requirements not shown in the Stacking Options below.
Panel Width: 600mm to 1220mm (Minimum telescopic panel width is 715mm)
Panel Thickness: 105mm. (nominal)
Head Track System & Configuration: Ceiling track is a heavy duty aluminium with integral ceiling support trim powder-coated as standard to RAl 9010,but can be finished in any RAL colour.
Mechanisms & Ironmongery: Top & Bottom seals are extended and retracted by way of an operating handle located in the vertical edge profile of each basic panel. The telescopic end panel (with nose extending to 110mm providing firm seal to wall jamb) is operated by means of an access point on the front face covered by an SAA finished escutcheon. Inset pass doors, permanently hinged Full-height Doors and Double Inset Pass Doors have recessed handles finished in SAA.
Jamb Details: Female wall post (65mm) and male wall post (50mm) are finished to match panel face.
Head Fixing & Acoustic Baffling: Head Track is typically suspended from a structural steel or concrete soffit with galvanised steel rods at 450 -650mm centres. Can also be fitted directly to the soffit if required. Any acoustic baffling to ceiling and/or floor voids is designed to maintain the acoustic performance of the wall system.
Panel Construction: Double skin 15mm MDF boards on a steel framework, Top hung only, without floor tracks or guides, complete with top and bottom retractable seals. Sound insulation materials to the internal cavity as necessary to achieve the specific acoustic rating requirement.
Panel Finishes (including but not limited to): Melamine, Laminate, Wood Veneer, Drywipe, Magnetic Dry Wipe, factory-applied paint, MDF Primed (ready for decoration by others), steel facing, pin board and mirrors. Vision panels manufactured to customers requirements can also be incorporated.
Standard Edge Profiles / Vertical Joints: Exposed edge profiles finished in SAA (as standard) or powder-coated to any RAL or BS colour. Concealed edge profiles are available complete with hardwood lippings if required. Profiles have magnetic locating strips and include neoprene diamond seals on higher acoustic-rated systems.
Access Doors: Single Inset Pass Door, Full Height Permanently Hinged Pass Door and Double Inset Pass Doors are available as an option.
Intersection of Multiple Systems: Specification can include walls meeting to form corner junctions, 'T' or 'L' shape systems.
M1: Single point, Centre Stacking
M2: Two point, Offset Stacking
M3: Two point, Remote Stacking
M4: Two point, Remote Stacking (Horizontal)
M5: Two point, Remote Stacking (Dual Split)
M6: Two point, Remote Stacking (Dual)
Full Height Pass Door
Double Pass Door
Single Pass Door
Telescopic End Panel